![background image](http://html1.mh-extra.com/html/farmtek/polaris/polaris_operating-instructions-manual_545497033.webp)
©
FarmTek, Inc.
FCC and Industry Canada Information
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against
harmful interference when the equipment is oper-
ated in a residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instruction manual, may cause harmful in-
terference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception, the user is encouraged
to try to correct the interference by one or more of
the following measures: (1) Reorient or relocate the
receiving antenna. (2) Increase the separation be-
tween the equipment and the receiver. (3) Consult
the dealer or radio/TV technician for help.
CAUTION
: Changes made or modifications not
expressly approved by the party responsible for FCC
compliance of this equipment could void the user’s
authority to operate the equipment.
Industry Canada
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more
than that necessary for successful communications.
This radio transmitter (IC: 3845A-MI043) has been
approved by Industry Canada to operate with the
antenna types listed below with the maximum per-
missible gain and required antenna impedance for
each antenna type indicated. Antenna types not in-
cluded in this list, having a gain greater than the
maximum gain indicated for that type, are strictly
prohibited for use with this device.
¼ wave whip, max gain 2 dBi, 50 ohm
This device complies with Industry Canada license-
exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not
cause interference, and (2) this device must accept
any interference, including interference that may
cause undesired operation of the device.
d'Industrie Canada
Conformément à la réglementation d'Industrie Can-
ada, le présent émetteur radio peut fonctionner avec
une antenne d'un type et d'un gain maximal (ou in-
férieur) approuvé pour l'émetteur par Industrie Can-
ada. Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il
faut choisir le type d'antenne et son gain de sorte
que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.
Le présent émetteur radio (IC: 3845A-MI043) de
modèle s'il fait partie du matériel de catégorie I) a
été approuvé par Industrie Canada pour fonctionner
avec les types d'antenne énumérés ci-dessous et
ayant un gain admissible maximal et l'impédance
requise pour chaque type d'antenne. Les types d'an-
tenne non inclus dans cette liste, ou dont le gain est
supérieur au gain maximal indiqué, sont strictement
interdits pour l'exploitation de l'émetteur.
¼ whip d'onde, le gain max 2 dBi, 50 ohm
Le présent appareil est conforme aux CNR d'Indus-
trie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas pro-
duire de brouillage, et (2) l'utilisateur de l'appareil
doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en com-
promettre le fonctionnement.
Summary of Contents for Polaris
Page 8: ...Event Instructions ...