43
GROWSPAN
™
GOTHIC PRO GREENHOUSES AND SYSTEMS
Revision date: 06.06.18 113836_37_38_39DD
INSTALL THE ANTI-BILLOW ROPES
The anti-billow rope is installed along
the outside of the
frame
and stretches between ribbon board and baseboard.
ATTENTION:
Install rope in short sections along each side.
DO NOT INSTALL ROPE AS A SINGLE PIECE.
Complete these steps:
1. Beginning at
one end rafter
, take two (2) eye screws
and align and attach one to the baseboard and one to
the ribbon board.
2. Using the sample diagrams as guides, move to the next
rafter and attach eye screw to either the baseboard or
ribbon board, depending on pattern.
3. Continue installing eye screws until you reach the other
end rafter and finish installation by repeating Step 1.
4. Install eye screws for remaining side.
5. Install anti-billow rope
in short lengths along each side
. Thread free end of rope through end rafter eye screws and
through eye screws at two to three interior rafters.
6. Cut rope and tie ends to eye screws.
7. Repeat this pattern of
installing short rope lengths
for remainder of first side and the other side.
8. Continue by sealing the greenhouse.
Curtain and roof panels are not shown.
Dashed line shows position of anti-billow rope.
EXAMPLE: Circles identify the ends of Rope #1. Actual frame may differ.
ROPE
#1
ROPE
2
ROPE
#3
