9
Revision date: 01.27.20 115554
6
Install Pump and Attach Supply and Drain Tubes
INSTALL PUMP AND SUPPLY LINE AND DRAIN TUBE—continued
10. Take the remaining valve
assembly and slide a ratchet
clamp over end.
11. Slide assembly onto remaining
bulkhead fitting and secure
connection as described early
(Step 8).
12. Measure from valve to top of
lid and add 2"-3" so tube when
installed extends below lid
surface.
13. Cut a 3/4" tube to the length
determined in previous step.
14. Attach tube to in-line valve
assembly attached to bulkhead.
15. Secure connection with clamp.
16. Inspect all connections to ensure
they are tight. Ensure valves
open and close as desired and in
the desired direction.
17. Continue with the next procedure.
8. Secure connection using pliers to
squeeze ratchet clamp.
9. Inspect assembly and ensure that
tube and pump are aligned.
