3
Revision date: 01.27.20 115554
1
ATTACH LEG TUBES
Assemble frame on a flat, level surface.
Attach Leg Tubes
Assemble as shown.
112477
FALB34B
Complete these steps to install each 112477 insert:
1. Add one FALB34B nut to threaded stud of each
113030S01 foot and attach one foot to each 112477
insert.
2. Slide one 112477 insert assembly into bottom of
each 28" vertical leg tube. Tap gently with a small
hammer if needed to seat in place.
3. Secure each insert to each tube using two (2)
112838 Tek screws.
Install screws through leg
tube and wall of the 112477 insert and not the
open side of the insert. Install screws slightly off
center line of the leg tube to prevent contact with
threaded rod. See dashed line for center of tube.
4. Adjust 113030S03 leveler so it is seated against
threaded plate of insert and locknut. See diagram to
the right.
5. Secure leg tubes to 115554H tubes using FAG338B flat head
bolts and FAME51B washers.
Bottom
of Leg
Tube
112477
FALB34B
Locknut
113030S03
x
x
115554L
115554L
115554H
FAG338B
Hex Bolt
FAME51B
Washer
112838
Tek Screw
Steps 1 & 2
Steps 3 & 4
