DISPLAY UNITS
6
Revision date: 09.04.12
9. Set the last narrow shelf on both frames in the lower
front position. Insert four (4) round head screws, with
their heads to the outside of the frame, through the
frame and shelf. Tighten all screws securely.
10. Press the lock button on one end of the purlin. Slide the
short leg of one (1) purlin support over the end of the
purlin.
11. Continue pushing purlin support over the purlin until
the lock button pops through the hole in the purlin
support. Repeat the step for the other purlin support.
12. With the assistance of a helper, insert the ends of the
purlin assembly into tubes on the upper frames. Orient
the purlin to the front.
CAUTION:
Do not stand on Display Bench shelves.
