CARTS AND WAGONS
6
Revision date: 10.22.08
Tongue
Tongue Pivot
Steering Arm
2. Align holes in the front axle brace and front axle
assembly with holes in the tub.
3. Insert two (2) tub-to-axle bolts through the tub and into
the front axle assembly and one through the tub and
into front axle brace.
4. Install flat washers, lock washers, and nuts on the bolts
and tighten the nuts.
5. Slide a wheel spacer and a wheel onto the front axle.
NOTE:
Install the wheel with the valve stem to the
outside.
6. Slide a wheel flat washer and a wheel lock washer onto
the outer end of the axle and then install and tighten
the wheel cap nut.
7. Repeat the same steps for the remaining wheel.
8. Set the wagon on the wheels.
9. Slide the tongue pivot onto the tongue.
NOTE:
The tongue has two sets of holes allowing it to
be positioned two different ways.
Tongue Position 1
Tongue Position 2
10. Attach the tongue as desired.
11. Align the holes in the steering arm and tongue pivot
and insert the steering pivot bolt through the holes.
12. Install the steering pivot washer and locknut on the bolt
and tighten the nut enough to remove the play in the
joint.
NOTE:
Do not overtighten the locknut.
13. Check all fasteners to ensure they are tight.
14. Use the wagon.
Axle
Wheel Spacer
INSTALL FRONT AXLE (CONTINUED)
Front Axle
Brace
Front Axle
Assembly
Wheel Flat
Washer
Wheel Lock
Washer
Wheel
Cap Nut
