Visit
www.FarmTek.com
for additional products and customer assistance.
WEATHERSHIELD AWNINGS
10
INSTALL THE MAIN FRAME COVER
After the frame is secured in place, squared and anchored,
install the main cover.
Gather the parts:
• Snugger ball tie downs (#CC4595)
• Main cover
NOTE
: Assistance is required to install the main cover.
1. Locate the main cover, unfold it along the assembled
frame, and drape it over the frame and into position.
2. Take the snugger ball tie downs, feed the stretch cord
through a grommet, and attach the main cover to
the assembled frame. Use one snugger ball for each
grommet.
3. After the main cover is installed, use the remaining pipe
straps to (QH1070) attach the upper-back purlin to the
building to secure the frame. (See arrows above for
location.)
4. Continue with the side panel installation (if equipped),
or read the shelter care and maintenance information
that follows.
WARNING:
To prevent property damage
and personal injury, do not install the
cover on a windy or stormy day.
NOTE:
Dashed lines show where to
attach the main cover to the frame.
The main cover
will not
wrap
around the frame piping.
1
2
3
ATTENTION:
When the cover is correctly installed,
a space will remain between the edge of the cover
or panel and the frame as shown in the diagrams
below.
The cover
does not
wrap over the top edge of the
shelter frame.
