Visit
www.FarmTek.com
for additional products and customer assistance.
CARTS AND WAGONS
Turn the dump cart right side up and onto its wheels.
Attach the handle by inserting two (2) handle bolts
through the holes in the sides of the tub and through
the holes in the handle. Tighten the nuts.
10.
11.
Handle Bolts
CARE AND MAINTENANCE
Periodically check all fasteners to assure they are
tight.
Clean the
dump cart using water and mild soap. Rinse
with water sprayed from a garden hose. (Tip the dump
cart forward to let water drain out after washing.)
Inspect the cotter pins and verify that they are in
position and in good condition.
•
•
•
This space reserved for customer notes.
NOTE:
Position the washers and nuts to the outside.
Repeat the above step to attach the remaining handle.
Return to all fasteners and verify that they are tight.
Check the air pressure in the wheels and inflate to the
desired level.
ATTENTION:
Note the maximum weight and pressure
levels and
do not exceed the levels shown on the tires
.
Read the care and maintenance information that
follows.
12.
13.
14.
15.