background image

Visit 

www.FarmTek.com

 for additional products and customer assistance.

CARTS AND WAGONS

YOU MUST READ THIS DOCUMENT BEFORE YOU  
BEGIN TO ASSEMBLE THE DUMP CART

.

Thank you for purchasing this dump cart. When  
properly assembled and maintained, this product will  
provide years of reliable service. These instructions include 
helpful hints and important information needed to safely 
assemble and properly maintain the dump cart. Please 
read these instructions 

before

 you begin.

If you have any questions during the assembly, contact 
Customer Service for assistance. 

SAFETY PRECAUTIONS

Periodically check nuts and bolts to make sure they are 
tight and secure.

Do not

 use the dump cart if any part is broken or 

damaged.

This dump cart is not a toy

Do not

 let children use the 

dump cart unsupervised.

Do not

 use on inclines; dump cart may tip or roll away.

Do not

 load your dump cart with more than 300 lbs.

Inflate with ambient air only; 

never use a flammable 

gas to inflate the tires

REQUIRED TOOLS

The following list identifies the main tools needed for 
assembly.

Flathead screwdriver

Wrench or ratchet and socket set

Pliers

UNPACK AND IDENTIFY PARTS

The following steps will ensure that you have all the  
necessary parts before you begin to assembly.

Unpack the contents of the shipment and place where  
you can easily inventory the parts. 

If anything is missing or you have questions, consult 
the Pictorial Parts List or contact Customer Service.

 

1.

2.

Summary of Contents for 103392






Reviews: