Farmi 381 HFC, Operation, Maintenance And Spare Parts Manual

Page: 13 / 72

FARMI 381 HFC / HF
13
1
10
9
8
7
6 5
4
3
2
11
13 12
INTRODUCTION
The FARMI 381 is a 4-knived chipper designed for
grapple loader feeding of up to 380 mm diameter
stems. The chip size can be adjusted to suit its various
end uses, such as biofuel, industrial raw material, soil
improvement or dry litter.
The HF381 hydraulic feed chute facilitates processing
of difficult to feed materials. The feed chute comes stan-
dard equipped with No Stress revolution control, which
shuts down the feed when the output Rpm drops too
low. The benefits of the No Stress mechanism are:
• tractors of lower power rating can be used
• more homogenous chip quality
• higher chip yield.
The FARMI 381 HF chipper has its own hydraulic unit.
TECHNICAL INFORMATION
MAIN COMPONENTS
1. Upper chamber
2. Lower chamber
3. Cutting disk
4. Knife
5. Vertical anvil
6. Horizontal anvil
7. Breaker
8. Discharge pipe
9. Feed unit frame
10. Feed hopper
11. Roller swing
12. Wiper
13. Conveyor feeder