FARMI 4571 / FARMI 4581
20
LUBRICATION
Using the appropriate hydraulic oils and lubricants is
essential for the trouble-free operation of the machine.
CHANGING THE OIL
Change the oil according to the vehicle’s maintenance
recommendations.
The crane has been filled with 10W/30 oil at the factory.
If the oil temperature does not exceed 70
o
C in the
summer, winter oil can be used all year round.
When changing oil, make sure that the oil grade being
used is compatible with the system and any oil remai-
ning in it.
HYDRAULIC OIL REQUIREMENTS
The freezing point must be below -50
o
C.
The viscosity must not be lower than 1.5 E
o
, +50
o
C for
piston pumps and 2.5 E
o
, + 50
o
C for gear pumps.
The hydraulic oil must contain the necessary additives
for lubrication, rust protection, and defoaming.
Hydraulic oils intended for use in tractors are usually
also suitable for use in hydraulic cranes.
OIL MAKE
HYDRAULIC SYSTEM
GREASE NIPPLES
-10
o
C ...+30
o
C
-25
o
C...-10
o
C
BP
ENERGOL SHF 46
ENERGOL SHF 32,22
ENERGREASE LS-EP2, L21M
ESSO
UNIVIS N46
UNIVIS N 32,22
BEACON EP2,
MULTIPURPOSE GR MOLY
MOBIL
DTE 16
DTE 15,13
MOBILUX EP 2
MOBIL GREASE MP, SPECIAL
SHELL
TELLUS OIL T46
TELLUS OIL T32,22
ALVANIA EP GREASE 2
TEBOIL
HYDRAULIC OIL 46
HYDRAULIC OIL 32, 33
SOLID 2/ summer, SOLID 0/ winter
UNION / TEXACO
RANDO OIL HDZ 46
RANDO OIL HDZ 32,
HYDRAULIC OIL HD 5W
MARFAK MULTI PURPOSE 2,
MOLYTEX GREASE 2
Lubricating point
Qty
Action
Interval
Notes
Slewing device
Bearings
3
Greasing
50 h
Racks
1
Greasing
50 h
Oil
5,5 l
Checking
50 h
Changing
1000 h
or once a year
Booms
Articulation
5
Greasing
10 h
Cylinder ends
4
Greasing
10 h
Extensions surfaces
2
Lubrication 10 h
Apply grease to surfaces.
Grapple
Articulation
6
Greasing
10 h
Cylinder ends
2
Greasing
10 h
Support legs
Articulation
2
Greasing
10 h
Cylinder ends
4
Greasing
10 h
OIL AND LUBRICANT GRADE TABLE
LUBRICANTING POINTS TABLE
