Farmi Forest CH180 AVANT Operation And Maintenance Manual Download Page 33

Page: 33 / 35

CH180 Avant

OTHER INDICATOR LIGHTS

GREEN INDICATOR LIGHT MEANINGS, SMART FEED CONTROL SYSTEM

NUMBER OF BLINKS

MEANING

The light is on continuously

Normal status

Continuous feed forward has been activated. Switch can be released.

Setting the normal speed of the knife disc

The light blinks once every second – The “No Stress” function has been

bypassed.

LED light blinks rapidly in all following situations:

Continuous feed forward is activated. Switch can be released.

Limit switch is activated (Pressed down.)

Limit switch has been shortly activated during feed but feeding request is still active. (Operating switch)
Feed forward or Feed reverse - position.

None of the situations described above does not require unplugging the electrics to continue.

Summary of Contents for CH180 AVANT




































Search results

Summary of Contents for CH180 AVANT

Reviews:

Related manuals for CH180 AVANT

Brands by name

Popular brands

Farmi Forest CH180 AVANT, Operation And Maintenance Manual

Search results

Summary of Contents for CH180 AVANT

Reviews:

Related manuals for CH180 AVANT

Brands by name

Popular brands