CH180 Avant
15
CH180 AVANT – GENERAL DESCRIPTION AND INTENDED USE
CH180 Avant is a disk chipper for Avant loader operation. The chipper can be used e.g. for the production of
chips to be used for landscaping or for bio energy. The chipper can be used to chop trunks, twigs and tree tops as
well as chopping waste and saw mill waste. The chipper can shred wood with a max. trunk diameter of 180 mm.
The CH180 Avant chipper is mounted to the Avant loader. It is driven by the hydraulics. There are 4 cutting
knives on the knife disc which cut the material. From the knives the chips are discharged to the desired position
using a discharge pipe. The material to be chipped is fed into the chipper manually.
MAIN COMPONENTS OF THE CH180:
1.
UPPER CHAMBER
2.
LOWER CHAMBER
3.
KNIFE DISK
4.
KNIFE
5.
VERTICAL ANVIL
6.
HORIZONTAL ANVIL
7.
DISCHARGE PIPE
8.
DISCHARGE PIPE LID
9.
AVANT MOUNTING FRAME
10.
FEEDER DEVICE
11.
FEED CHUTE
Summary of Contents for CH180 AVANT
Page 2: ......
Page 4: ......
Page 35: ...CH180 Avant 35 Farmi Forest Kilpivirrantie 7 74120 IISALMI FINLAND ...
