FARMI 61
22
8h
8h
20h
MAINTENANCE
SAFETY
Disengage the P.T.O and turn the
tractor off before you service the
winch, remove the keys so the
tractor cannot be started up acci-
dentally.
LUBRICATION
Following points require lubrication:
1. Grease the mechanical clutch parts after every
500 working hours. Always use good quality lubri-
cation grease.
2. Grease ball thrust bearings after every 1000 wor-
king hours.
3. Grease the PTO-shaft regularly and aways before
use as shown in figure 15.
4. Grease the drum chain lightly (not with oil) after
every 50 working hours with spray type, hardening
chain grease. Wipe off the excessive grease.
h= working hours
When used in winter
the guard tubes must
be greased to avoid
freezing.
Swing joints sideways for greasing
Apply grease inside the
outer telescopic profile
Ball thrust
bearings,
for example Teboil
MultiPurpose
Grease
Clutch halves,
for example
Teboil
Universal M
Thickening
agent
Litium
Litium
NLGI rating
2
2
Dropping point
o
C
185
180
Base oil viscosity
mm2/s @ 40
o
C
110
110
Operating
temperature
range
o
C
-30...120
-30...120
Fig. 15. PTO shaft lubrication
!
DANGER!