Manual
VIDIUM P 350 | P 450
8
│
24
1.
DESCRIPTION
VIDIUM P350
and
P450
are designed as semi-carried. The machine is equipped with TPH 3
mechanism to which the rotating mechanism of the plough is attached in the front. TPH 3 rotates the main su p-
porting frame where a row of double ploughshares is located, or also the tracing wheels or coulters, when in-
cluded. In the rear, there is a transportation axle, formed either with an independent wheel or a pair of wheels
according to the plough type. The ploughshares are protected either mechanically with a shear bolt or hydrauli-
cally.
WORKING PARTS OF THE MACHINE
Picture 2 – Working Parts of the Machine
1.1.1
TPH pulling hitch
1.1.2
Supporting leg
1.1.3
Rotary mechanism
1.1.4
Skim coulter
1.1.5
Ploughshare
1.1.6
Transport axle / wheel
1.1.7
Coulters
Working Body Mouldboards:
WY400 WST 430
PLOUGHSHARE PROTECTION AGAINST OVERLOAD
MECHANICAL PROTECTION BY A SHEAR BOLT
The VIDIUM ploughs are equipped with shear bolts that protect
against damage caused by overload (Pos. 1). When the bolt is cut off, it
is required to loosen the three-point screw (Pos. 2), lift the plough and
remove the remnants of the shear bolt in order to return the tilted body
of the plough into the working position. The new shear bolt and the
three-point screw must be tightened properly.
To ensure effective protection, always use original shear bolts with
corresponding dimensions and quality to ensure effective protection!
Never use bolts with higher or lower strength or bolts with a shorter
head!
1.1.1
1.1.2
1.1.3
1.1.4
1.1.5
1.1.6
1.1.7
