Manual
VERSO 6 PS | VERSO 7 PS | VERSO 8 PS | VERSO 9 PS
24
│
32
5.4
ADJUSTING THE FLEXI-BOARD
Correct position of the Flexi-boards affects the resulting quality of processing.
When adjusting, always observe generally valid safety regulations.
Adjust the Flexi-boards according to the current conditions.
Flexi-boards are adjusted hydraulically by the blue circuit. This circuit controls the front and rear row
concurrently.
The rear row moves more slowly than the front row during adjustment; the ratio is approx. 2:3.
The depth and angle against the land are both changed during the setting.
The position must be adjusted according to the set working depth.
The front Flexi-boards must be sufficiently low so that they can level unevenness and crush soil clods but
soil must not be accumulate in front of the boards.
Extended beam screws
Cultivator screws
Moving the edge beam
Moving cultivators along beams
Adjustable rod
Front Flexi-board
Rear Flexi-board
