Manual
TURBULENT 3 | TURBULENT 5 | TURBULENT 6
18
│
27
5.1.7
Tyre roller processing plane setting
The basic setting of the tyre rollers is performed by the manufacturer so that even levelling and hardening of
the soil surface is secured after processing with shares and angle discs.
In case uneven surface is created behind the machine, it is probably necessary to adjust the tyre rollers into a
plane.
Set the depth of all tyre rollers and the axle to the same value (e.g. 5).
Deepen the machine on a level field – the tyre rollers and the axle are supported by the depth
setting pivots.
Using the adjustable screws, set the middle roller parallel with the axle and frame wheels.
Using the adjustable screws, set the side rollers parallel with the axle wheels and the middle roller.
Tighten all nuts of adjustable screws with a torque of 1000 Nm.
Regularly check the adjustable screw nut tightening, tighten as needed (1000 Nm).
5.1.8
Disengagement of back auxiliary rollers
5.1.8.1
Disengagement of central roller
5.1.8.2
Disengagement of side rollers on TURBULENT 5; 6
Disengagement of small tyre rollers on the machine side frames must be done with the machine tilted
down.
Soil
Adjustment screw
of side rollers
Set depth to the same value
Adjustment screw
middle roller
Disengagement
Engagement
