Manual
STRIP-TILL ST4N | ST6NS | ST8NS
15
│
23
Setting the ploughshare hydraulic protection
1.
Check that the hydraulic hoses are connected properly under 3.2.
2.
Check that the ball valve of the ploughshare protection circuit is open; if not, open it.
3.
Pressurize the circuit of the ploughshare protection to 80 bar – using the hose marked with two black
strips; monitor the pressure on the black-coded manometer.
4.
Set the black circuit in the floating position in the tractor switchboard
5.
The protection is now prepared for work.
80 bar
