27
|
39
10 MACHINE ADJUSTMENT
•
Disc plough-harrow is attached to the three-point suspension in the usual way. The lower arms
of the hydraulic system must be at the same height from the ground. The working depth of the
discs is specified in the technical parameters – chapter 1.1.. The working depth range could be
reduced due to wear on the discs. The working depth must be adjusted according to the land
type and the soil conditions.
It is not permissible for the bearing housings to be touching the
soil surface during operation.
1 – Third point TPS – Setting of machine longitudinal plane
2 – Edge disc
3 – Side deflector
4 – Working depth adjustment
