Manual
SOFTER 12,5 PS
48
│
54
8.
MACHINE MAINTENANCE AND REPAIRS
Observe the safety instructions for treatment and maintenance.
If it is necessary to weld during the repair and have the machine connected to the tractor, it must have disconnected
supply cables from the alternator and the accumulator.
Check the tightening of all screw and other assembly connections at the machine before every use of the machine,
furthermore continuously as needed.
Continuously check the wear of the working bodies of the machine, possibly replace these worn working bodies
with new ones.
Adjustment, cleaning, and lubrication of the machine may only be performed with the machine at rest (i.e. the
machine is standing and not working).
When working on a lifted machine, use suitable support equipment supported at marked points or at points suitable
for that.
During adjustment, cleaning, maintenance, and repair of the machine, you must secure those parts of the machine
that could endanger the operator by falling or another movement.
For catching the machine during handling using lifting equipment, use only the places marked with self-adhesive
labels with the chain sign "
".
Upon a failure or damage of the machine, immediately turn off the tractor's engine and secure against restarting,
secure the machine against movement
only then you can remove the failure.
During repairs of the machine, use exclusively the genuine spare parts, suitable tools and protective equipment.
Regularly check the prescribed pressure in the machine tyres and the condition of the tyres. Perform possible
repairs of the tyres in an expert workshop.
Keep the machine clean.
Do not clean hydraulic cylinders and bearings with a high-pressure cleaner or direct water stream. The seals and
bearings are not watertight at high pressure.
