Manual
KOMPAKTOMAT K400NS | K500NS | K600NS
23
│
42
6.
ADJUSTING THE WORKING PARTS OF THE MACHINE
The position of the following individual working parts on the machine can be adjusted
o
Position and depth of the track cultivators,
Attention! The cultivators are not included in the
standard equipment of the machine!
o
Height and down pressure of the front leveller
o
Depth of the shares
o
Position of the leveller behind the shares (only for sweeps)
o
Angle of the rear finishing levelling bar.
The control of the front leveller position and the share depth setting can be either mechanical, or
automatic from the driver’s position.
It is possible to adjust the pre-loading of the folding bar springs in K500NS-K600NS machines.
6.1
ADJUSTING THE POSITION AND DEPTH OF THE TRACK
CULTIVATORS
Correct position of the track cultivator affects the resulting quality of processing.
When adjusting the track cultivator position, always observe generally valid labour safety regulations.
The tractor track cultivator position can be adjusted either by height or length.
The track cultivators are attached to launching beams that can be launched to the width of 3900mm.
The track cultivators may be moved along the beam so that it cultivates the compacted tractor wheel
tracks.
The number of track cultivators can be selected from 1 to 4 pieces behind the wheel, i.e. 2 to 8 pieces
per machine.
K400NS, K500NS, K600NS
Minimum cultivator setting width (mm)
1500
Maximum cultivator setting width (mm)
3700
Lengthwise setting of the cultivators is done by moving the cultivators along the beam to the position
behind the tractor wheels so that they cultivate the compacted tractor track. Lengthwise setting of the
cultivators can also be used for tractors with dual assembly up to the width of 4m. In this case, we
recommend adding another cultivator, or cultivators, to each side.
Setting the depth of the cultivator is performed by removing the pin and moving the cultivator in the
holder. Before setting the depth of the cultivators, set the machine in the position when the cultivators
are not loaded.
