Farmet FALCON 3, Operating Manual

Page: 9 / 99

Manual
FALCON 3 | 4 | 6 | 8
9
│
99
SAFETY WARNING
A. GENERAL INSTRUCTIONS FOR USE
A.1
(x)
The machine is produced in compliance with the latest technological conditions and approved safety
regulations. However, the use of the machine may still cause injuries to the user or third persons or
damage to the machine or occurrence of other material damages.
A.2
(xx)
Use the machine only in a technically unexceptionable condition, in compliance with its purpose, with
awareness of potential risks and observance of safety instructions stated in this manual!
The Manufacturer is not liable for damages caused by the use of the machine that is in contradiction with
the limit parameters of the machine (p. 7) and with the instructions for the use of the machine (Chapter
A and 3). The User bears the risk.
Immediately eliminate all defects that could have a negative impact on safety!
A.3
(7)
The machine may only be operated by a person authorized by the owner under the following
conditions:

(8)
He or she must have a valid driving licence in the relevant category,

(9)
He or she must be verifiably informed on the safety rules of working with the machine and must
have command of the operation of the machine in practice,

(10)
The machine must not be operated by a minor (minors),

(11)
He or she must understand the meaning of warning symbols placed on the machine. Respecting
the symbols is important for a safe and reliable operation of the machine.
A.4
(12)
Maintenance and service repairs may only be performed by a person:

(13)
Authorized by the owner,

(14)
Trained in an engineering field with the knowledge of repairs of similar machinery,

(15)
Verifiably informed on the safety rules of working with the machine,

(16)
With a driving licence in the relevant category for repairs of the machine attached to a tractor.
A.5
(17)
The operator of the machine must ensure safety of other people during the work with the machine and
its transportation.
A.6
(18)
During machine work in the field or during transport, the operator must control the machine from the
tractor's cabin.
A.7
(19)
The operator may only enter the construction of the machine when the machine is off and secured
against movement only in order to:

(20)
adjust the working parts of the machine,

(21)
repair and maintain the machine,

(29)
release or secure the ball valves of the axle,

(27)
secure the ball valves of the axle before tilting the side frame,

(28)
adjust the working parts of the machine after opening the side frame.
A.8
(xxx)
When climbing onto the machine, do not step on the tyres of the rolls or other revolving parts as they
may roll over and you can seriously hurt yourself if you fall down.
This warning symbol warns against an imminent dangerous situation that
could lead to death or serious injury.
This warning symbol warns against a dangerous situation that could lead
to death or serious injury.
This warning symbol warns against a situation that could lead to a small or
minor injury. It also points out dangerous tasks related to the activity that
could lead to an injury.