8.2 Hydraulics connection
•
Connect the hydraulics only when the hydraulic circuits of the machine and the tractor
(aggregate) are in a pressure-less condition.
•
The hydraulic system is under high pressure. Regularly check for leaks and immediately
remove obvious damage of all lines, hoses, and pipe unions.
•
When seeking and removing leaks, use only the suitable tools.
•
For connecting the hydraulic system of the machine to the tractor, use the plug (on the
machine) and the socket (on the tractor) of the quick-couplers of the same type. Perform the
connection of the quick-couplers of the machine to the hydraulic circuits of the tractor so that
the folding of the side frames
(BLUE and WHITE DUST CAP)
is on one control circuit.
In order to prevent accidental or foreign person (children, passengers) caused movement of the
hydraulics, the control switchboards on the tractor must be secured or blocked in the transport
position.
21
|
38
Summary of Contents for DUOLENT DX 380 NS
