EN
4
No 5:
Large square bale - Over 240 kg/m
3
No 6:
Bales with density - 80 to 250 kg/m
3
When measuring small bales with scales
-3-
ja
-6-
, you can normally use the density
setting 180 kg/m
3
.
The most accurate results are obtained when
you use the real density of the bale.
The meter also has scale number -0-, this is
used for service purposes.
2.4. Selection of the scale
2.4.1. Checking the current scale
Turn
ON-
The number of the current scale will
appear on the display, e.g.
-1-
.
2.4.2. Choosing the scale
Turn
ON-
. Wait until you can see the scale
number on the display, e.g.
-1-.
Change it by pressing
MENU
.
When you have the desired number, wait a
moment, then
run
is in the display, the meter
will turn itself off and is ready for measurement.
2.5 Measurement
Turn ON
. The display will show all available
characters to allow you check that the display is
working properly.
After this you will see the number of the scale
that is in use, e.g.
-1-
.
When using the scale
-3-
or
-6-
you will see the
current bale density setting, for example 120
kg/m³.
You can change this setting when necessary
(please see. 2.6).
