EN
6
3. PROCESSING THE RESULTS
3.1. Average calculation
The meter can store and calculate an average
value of 99 measurements. After a measure-
ment you can add the result to the average
calculation.
3.1.1. Adding a result to the average
calculation
When the result is shown on the display, Press
MENU
. Now
A
will be on the display, the meter
has included the latest result to the average.
Then the average calculations E.g.
A05
and
28,8
are alternating on the display.
It means the following:
A05
– The avg. is based on 5 measures
28,8
- The avg. moisture % of the results.
If you don't want to include the results just wait
and the meter will automatically switch off. Then
just start again.
Before using the average calculation, always
check that the average memory is empty.
Delete if necessary.
3.1.2. Delete the average memory
Method 1
. When the average value is
displayed, press MENU and keep it pressed
until you see
0
and after that
A00
on the
display.
Method 2
. Press
MENU and keep it
depressed
then press
ON
. When you see
A
on
the display, release the
MENU
button. If you
now see an average value, you can erase it by
keeping the button
MENU
depressed until you
see on the display
0
and after that
A00
.
