Farm King BW150, Operator And Parts Manual

Page: 25 / 74

Operation - BW150
25
Front Ballast
Figure 3
Measure and record the distances at each location
shown
[Figure 3] .
Use the following to determine if front ballast is required:
Ballast Not Required - If the first term is lower or equal
to the second term, it is not necessary to use ballast.
Ballast Required - If the first term is higher than the
second term, use the following formula for calculating the
ballast Z:
Entering And Leaving The Operator’s Position
Entering The Operator’s Position
Move to the operator’s position, start the engine and
release the parking brake.
Leaving The Operator’s Position
Park the tractor / equipment on a flat level surface.
Place all controls in neutral, engage the park brake, stop
the engine and wait for all moving parts to stop. Leave the
operator’s position.
See your tractor’s operator’s manual for front ballast
information.
BW-006
N1
G1 Z
L3
L4 B
N1 x B 0.66 x (G1 x L4)
FIRST TERM SECOND TERM
Ballast (kg) = (N1 x B : 0.66 - G1 x L4) : (L3 + L4)
Follow the instructions in your tractor’s operation
manual for the correct procedure.
AVOID INJURY OR DEATH
Before you leave the operator’s position:
•
Always park on a flat level surface.
• Place all controls in NEUTRAL.
• Engage the park brake.
• Stop the engine and remove the key.
• Wait for all moving parts to stop.