Farm King 1684, Operator And Parts Manual, Page: 64 / 158

Maintenance - 1684, 16104, 16124 Backsaver Auger
62
Side Cables - Model 16104
Figure 58
Bottom Tube Adjustment Bolt
Loosen all cable clamps along the cable being
tightened.
Tighten the nut (Item 1) of the left / right bridging
cable on tube #1
[Figure 58] .
Tighten both left and right side bridging cables
evenly.
Look down the length of the auger tubes.
If the tube bends left or right, loosen the adjustment
bolt on one side while tightening the bolt on the
opposite side until straight.
Snug the adjustment nut securely against the
mount once adjustments are complete.
IMPORTANT
If the nut is fully tightened and bottoms out
against the eye of the adjustment bolt, the top
tube adjustment bracket will need to adjusted.
Do not remove the nut from the adjustment bolt.
After adjusting the cable(s), tighten all cable
clamps along the cable(s).
Figure 59
Top Tube Adjustment Bracket
Make sure the bottom adjustment bolt (Item 1) is
loosened
[Figure 58] .
Remove bolt (Item 1) and lock nut from the
adjustment bracket (Item 2)
[Figure 59] .
Move the bracket (Item 2) back, one hole. Re-install
the bolt and lock nut. Tighten until the bracket is
securely fastened to the tube mount
[Figure 59] .
Repeat for adjusting remaining bridging cables.
Re-tighten the bottom adjustment bolts (Item 1)
[Figure 58] .
1
1
2