9
CHANGE TEMPERATURE:
To raise or lower the room temperature simply press buttons “+” o “-“ until the
temperature indicator displays the desired heat level. The Farho heater will automatically
adjust the heat emission efficiently until reaching the temperature level set.
HOW TO ACTIVATE AND DEACTIVATE PROGRAMMES:
TO ACTIVATE PROGRAMMES:
1.
Press the key.
2.
The “ “ indicator will position itself in front of “Programmes”. Press the key.
5.
Press the and keys to enter the correct hour setting.
6.
Press the key.
7.
Press the and keys to enter the correct minute setting.
8.
Press the key.
9.
Press the and keys to enter the correct day of the week.
10.
Press the key.
BOOSTER MODE:
The “booster” function allows users to set the heater to its maximum performance
during 1, 2 or 3 hours so the room temperature increases rapidly. To activate this feature
users must press simultaneously buttons “OK” and “+” for every hour that they want the
booster mode on. If you want to activate the booster just for one hour press the button
once, if the user wants it to be running for two hours press it twice and for three hours
press it three times. If the user wishes to deactivate the booster feature, the “OK” and
“+” button should be pressed until the display shows the message “BOOSTER OFF”.
HOW TO BLOCK AND UNBLOCK THE KEYPAD:
The XP model has a keypad blocking function to avoid its handling by children or
unauthorized people.
To block the keypad, press the “MENU/CANCEL” button during approximately 4 seconds
until the display shows a “Blocked” message. While the keypad is blocked the heater
will not respond to orders and the screen will show the word “Blocked”.
To unblock the keypad, just press during approximately 4 seconds the same “MENU/
CANCEL” button until the message “Unblocked” shows up.
HOW TO KNOW IF THE HEATER IS CONSUMING OR NOT:
If the heater is consuming, the pre-set temperature indicator
on the display will flick. If it is not flickering, the heater is in
the idle mode.
