Farho XP-3 Fitting And Operating Instructions Download Page 6

6

11.

   Press     and     to set the desired ending hour for the first program slot, and then 

press    .

12. 

 Press      and      to set the desired ending minute for the first program slot, and then 

press    .

13. 

 Press      and     to set the desired temperature for the first programming block, and 

then press    .

14.

  Repeat steps 10 – 13 until you reach “00:00” as an ending time for your programming 

block (Reminder: maximum 6 programming blocks available).

15.

  If you have programmed less than 6 blocks in total, you need to press      and      keys 

until “--:--“ is displayed as a starting time for the next block, and then press    . This 
will cause the programs editor to close and the program to be stored. If you press 
and hold     to exit the programs editor, no changes will be stored.

HOW TO ENTER A TEMPERATURE OFFSET:

This heater allows the user to manually enter a temperature offset for the temperature 
probe. This is useful when the heater is located in a particularly exposed or particularly 
sheltered location, to correct the temperature reading relative to another relevant location 
within the same space.

1. 

  Press the     key.

2.

  The “ ► “ indicator will position itself in front of “Programs”. Press      key to position 

the “ ► “ indicator in front of “Configuration”.

3.

  Press the     key.

4.

  The “ ► “ indicator will position itself in front of “Time”. Press the      key twice to position 

it in front of “Offset”.

HOW TO ENABLE OR DISABLE OPEN WINDOW DETECTION FUNCTION:

TO ENABLE OPEN WINDOW DETECTION:

1. 

  Press the     key. The “ ► “ indicator will position itself in front of “Programs”.

2.

   Press the      key once to position the “ ► “ indicator in front of “Configuration”.

3. 

  Press the     key. The “ ► “ indicator will position itself in front of “Time”.

4. 

  Press the      key once to position the “ ► “ indicator in front of “Window sensor”.

5. 

  Press the     key.

6. 

  The text “Wind: Off” will be displayed. Press       or      to change the text to “Wind: On”.

7. 

  Press    . The Open Window Detection function will now be enabled.

TO DISABLE OPEN WINDOW DETECTION:

1. 

  Press the     key. The “ ► “ indicator will position itself in front of “Programs”.

2. 

  Press the      key once to position the “ ► “ indicator in front of “Configuration”.

3.

   Press the     key. The “ ► “ indicator will position itself in front of “Time”.

4. 

  Press the     key once to position the “ ► “ indicator in front of “Window sensor”.

5.

   Press the     key.

6. 

  The text “Wind: On” will be displayed. Press      or      to change the text to “Wind: Off”.

7. 

  Press     . The Open Window Detection function will now be enabled.

Summary of Contents for XP-3

















Reviews: