12
POWER SUPPLY:
• Farho radiator requires a current supply of 230 V.
• All Farho Victoria radiator are supplied with a standard interchangeable
power cord.
• If the cord is too long or short, it can be substituted by another one,
with IEC plug and maximum supported power of 16A.
• The power cord must not touch any hot part of the radiator. In order
to ensure this, gutters, clips or some other type of securing compo-
nent will be employed.
• In order to disconnect the radiator, perform the inverse operation of
the one previously mentioned. The radiator will be installed under the
applicable laws of the country where it is installed.
POSITIONING:
• The ideal positioning for the radiator is to place it as close as possible
to the facing that suffers most heat loss. It is not recommended to
place the heaters on uninsulated exterior facing walls. If necessary, a
reinforcement in the insulation of the surface onto which the heater is
to be fitted must be added.
• In the bathrooms,
radiator will not be
installed within de pro-
tection volume reflec
-
ted in the applicable
laws of the country
where it is installed.
• When choosing the
positioning, the mini-
mum distances indica-
ted in figure 1 will be
respected.
INSTRUCTIONS FOR THE INSTALLER
TECHNICAL SPECIFICATIONS SHEET
Close to a wall
100% yield
With top shelf
90% yield
In niche
85% yield
