6
START SCREEN
Room temperature will be shown on the start screen, as well as icons for
Smart Start, open windows detection and power control, in case they
are activated.
Clicking up and down buttons you will be able to edit the setpoint value.
In manual mode, the heater will keep that value until further modification.
With the active programmes, the current section will be cancelled and
the heater will keep the set point value introduced manually until entering
a new programme section.
When clicking the OK button you will enter the main menu.
After a few seconds without touching the buttons, the heater will turn
off the display.
PROGRAMMING
1. First, update date and time of the radiator
(MENU – ADVANCED SETTINGS – TIME).
2. ENTER THE PROGRAMMES
(MENU – PROGRAMMES – OK).
3. USE THE NAVIGATION ARROWS AND to access EDIT
and press OK:
• Select the days of the week which will share the same programming,
pressing ok in each one of them. Then, scroll down to “next” and
press OK.
• ●Start time, finish time and desired temperature will be requested
for this period. Once introduced, press OK. A blank time slot will
be shown, repeat this step to set it up.
• ●Up to 6 time slots can be introduced from 00 h to 24 h, repeating
the previous step. If you do not want more than 2 or 3 time
slots, the rest will be automatically configured with anti-freeze
temperature (5ºC).
• ●Unscheduled periods will be automatically configured with anti-
freeze temperature.
4. TO SEE RECORDED PROGRAMMES.
• ●Enter MENU – PROGRAMMES. Using the arrows, search for SEE
and click OK.
• ●Select the day of the week you want to see and click OK.
