manualshive.com logo in svg

FARGO electronics S000256, User Manual

Share
Download
FARGO electronics S000256 User Manual Download Page 149

RESTRICTED USE ONLY 

 

FARGO Electronics, Inc. 

Installing the Printer Driver From the Software 
Installation CD 

To install the printer driver, close down all other programs and insert the Software Installation 
CD into your computer's CD drive.  The CD will automatically open and prompt you to click 
on the photo of your specific printer model to begin installation.   

•

  If the CD does not automatically open, use "My Computer" or "Windows Explorer" to view 

the contents of the CD.  Then, double-click on the 

Setup.exe 

file listed on the CD. 

•

  Follow the on-screen instructions to complete installation. Once installed, the icon for 

your specific printer model will appear in the Printers folder.  The Online User's Guide will 
also automatically install along with the printer driver.    

•

  An icon for this will appear in the 

Start->Programs->Fargo 

folder.  Select the 

Online 

User Guide

 icon to open the Online User's Guide any time you have a question about 

operating your printer. 

Installing Printer Driver Updates 

Occasionally, new printer driver versions are released which have new or updated features. 
Before installing an updated printer driver version, always delete the existing printer driver 
version from your system.  

To do this, select Start, Programs and point to the Card Printer folder. Then, select the 

Uninstall Printer Driver 

icon for your specific printer model. 

Once the existing printer driver is deleted, the updated version can be installed.  The best 
way to get printer driver updates is to download them from your reseller's or the printer 
manufacturer's website.  

See the procedures to download and install updated printer drivers. 

 

Persona

®

 C25 Card Printer User Guide (Rev. 4.0) 

149

Summary of Contents for S000256






















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands