manualshive.com logo in svg

FARGO electronics S000256, User Manual

Share
Download
FARGO electronics S000256 User Manual Download Page 146

RESTRICTED USE ONLY 

 

FARGO Electronics, Inc. 

Using your Card Printer 

Connecting the Printer to your Computer 

Your card printer is designed to be used with nearly any IBM-PC or compatible running 
Windows 3.1x, Windows 95/98, or Windows NT.  A minimum of a 486 DX class computer 
with 8MB RAM or higher is required.  For best performance, a Pentium-class computer with 
32 MB RAM or higher is recommended. 

The printer is equipped with an ECP-compatible, high-speed Centronics parallel port.  This 
port is the means through which the printer receives data from your computer.  To connect 
the printer to your computer, obtain a shielded, bi-directional parallel cable and refer to the 
following steps: 

Step Procedure 

1 

Connect the Centronics-type parallel side to the printer.  

Snap the fastening clips into place.  (

Note:

  The extra port shown in the previous 

illustration is an Auxiliary Port (subminiature-D connector) included and used only 
on units equipped with an optional smart card contact station.) 

If your unit is equipped with a contact station and you have questions regarding its 
use, please contact your authorized reseller. 

 

 

 

Persona

®

 C25 Card Printer User Guide (Rev. 4.0) 

146

Summary of Contents for S000256






















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands