RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona C10/M10 ID Card Printer Service Manual (Rev. 4.0)
68
Selecting the Overlay option
Use this option to automatically print
Neither Side
,
Back Side Only
,
Front Side Only
, or
Both Sides
of a card.
Step Procedure
1
Select this option in conjunction with any application program that supports a
multiple page document. (
Note:
In other words, the program must be able to
send down two or more separate pages to be printed within the same
document.)
•
Select
Neither Side
for non-use of the Overlay option.
•
Select the
Front Side Only
,
Back Side Only
, or
Both Sides
setting to
designate the side or sides of the card for the image to print on.
Note #1:
Print a full-color ID format on the front of the card and monochrome
text or bar codes on the back by creating the full-color front side of the card (on
page 1) of the document and the monochrome backside (on page 2). (
Note:
The Printer Driver always places the odd numbered pages on the front side of
the card and the even numbered pages on the backside.)
Note #2:
To customize the overlay and/or print area, select one of the options
listed under Overlay. Use this option to control the overlay (O) panel and/or the
print area appearing on a card; also, use it to omit or block out the overlay or
printing around a card's smart chip or Magnetic Stripe. By default, this option is
set to print and overlay the entire card.
