Using FotoFUN! for Windows 12
10. Finally, select the
Connect
button. Check that the box
called
Fast Printing Direct to Port
is selected. Although
this option is not necessary, it helps optimize printer driver
speed and performance. Select
OK
to exit the Connect
window. Select
Close
to exit the Printers window. See
section C for information on printer driver settings and
options.
C. SETTING UP THE
FotoFUN! PRINTER DRIVER
Once the printer driver has been successfully installed, you
will need to set the driver up with the appropriate print
options. Refer to the following steps to change or verify your
printer driver options:
1. If using Windows 95, go back to the Printers folder (see
step 2 on page 10). Then, click on the
FARGO FotoFUN!
icon with the
right
mouse button and select
Properties.
The Properties window will appear. If using Windows
3.1x, go back to the Control Panel and the Printers group
(see steps 1 and 2 on page 11).
2. In Windows 95, click on the
Details
tab of the Properties
window and select the
Setup
button. In Windows 3.1x,
select the
Setup
button.
NOTE
Most applications allow you to change these same printer driver
options from their “Print” and/or “Printer Setup” screens. This
means that you don’t have to go back to the main printer setup
window each time you want to change a setting or option in the
printer driver. These applications will usually give you the same
choices and options, but in a slightly altered format.
510489 FotoFUN! 7/29/98 3:26 PM Page 13