Front panel buttons
1.
!
(Menu) button: press to display Operation menu option.
2.
!
(Recording button): press to start recording.
3.
"
(Stop recording/playback button):press stop recording/playback
(the authorized password is requested upon stopping record;
the default password is 111111).
4.
!
(Fast forward button): press to play the recorded stream faster.
5.
!
(Playback button): press to start playback.
6.
"
(Pause button): press to pause the video playback.
7.
#
Reverse: press to playback backward.
8. Channel 1 button: press to select channel 1.
9. Channel 2 button: press to select channel 2.
10. Channel 3 button: press to select channel 3.
11. Channel 4 button: press to select channel 4.
12. All channels button: press to select all channels display.
13,14.
$%
up down buttons: press to change menu field.
15. (Select) button: Cyclic function. Press to change the setting value or enter
into a sub menu.
16. Power ON LED indicator.
17. Recording LED indicator.
Rear panel
1. S-Video output
2. Composite video output
3. Monitor: Secondary Video output
4. Video input
5. Video loop-through
6. Sensor input/alarm output: 4 sensor inputs and one alarm output
7. NTSC/PAL switch
8. DC-in (12Voltage)
9. Power switch
10. USB 2.0 link to PC
Notices:
- Before powering the system, check that the video system selector is properly
switched to the standard (NTSC/PAL) used.
- To avoid noise and bad images it is very important to run 75
Ω
coaxial cable
between cameras, DVR and monitor. Choose the correct kind of cable
according to distance and avoid to run video signal cables together with mains
cables.
- Use only 75
Ω
BNC connectors for each cable to respective video input and
pay attention during their installation. Many times not proper functioning,
noises and low quality images are due to bad connections.
- Always switch off the DVR before change any connection.
-
To avoid HDD from loose data, stop recording before switch off the
DVR
.
