background image

ONE-YEAR LIMITED WARRANTY

This FARBERWARE® product warranty extends to the original consumer purchaser of the product.

Warranty Duration: 

This product is warranted to the original consumer purchaser for a period of one

(1) year from the original purchase date. 

Warranty Coverage: 

This product is warranted against defective materials or workmanship. This

warranty is void if the product has been damaged by accident, in shipment, unreasonable use, misuse,
neglect, improper service, commercial use, repairs by unauthorized personnel or other causes not
arising out of defects in materials or workmanship. This warranty is effective only if the product is
purchased and operated in the USA, and does not extend to any units which have been used in
violation of written instructions furnished by FARBERWARE®, or to units which have been altered or
modified or to damage to products or parts thereof which have had the serial number removed, altered,
defaced or rendered illegible. 

Warranty Disclaimers:

This warranty is in lieu of all warranties expressed or implied and no

representative or person is authorized to assume for FARBERWARE® any other liability in connection
with the sale of our products. There shall be no claims for defects or failure of performance or product
failure under any theory of tort, contract or commercial law including, but not limited to, negligence, gross
negligence, strict liability, breach of warranty and breach of contract.  Some states do not allow the exclusion
or limitations of implied warranties or consequential damages, so the above limitations or exclusions may not
apply to you.
FARBERWARE® is not responsible or liable for indirect, special or consequential damages arising out of or
in connections with the use or performance of the product or other damages with respect to loss of property,
or loss of revenues or profit.

Legal Remedies: 

This warranty gives you specific legal rights, and you may also have other rights that vary

from state to state.

Warranty Performance: 

During the above one-year warranty period, a product with a defect will be

either repaired or replaced with a reconditioned comparable unit (at FARBERWARE®’s option) when
the product is returned to the FARBERWARE® facility listed below. The repaired or replacement
product will be in warranty for the balance of the one-year warranty period and an additional one-
month period. No charge will be made for such repair or replacement. 

Service and Repair

If service is required, you should first call toll-free 1-888-881-8101 

between the hours of 8:00 am and

5:00 pm Central Standard Time

and ask for 

CONSUMER SERVICE

. Please refer to Model FSN100 when

you call.

In-Warranty Service 

for a product covered under the warranty period, no charge is made for service

and return postage. Please return the product insured, packaged with sufficient protection, and
postage and insurance prepaid to the address listed below. Call for return authorization. 

Out-of- Warranty Service:

There will be charges rendered for repairs made to the product after the

expiration of the aforesaid one (1) year warranty period, after purchaser is advised appropriately.
Include $ 6.00 (U.S.) for return shipping and handling.
FARBERWARE® cannot assume responsibility for loss or damage during incoming shipment. For your
protection, carefully package the product for shipment and insure it with the carrier. Be sure to enclose
the following items with your unit: any accessories related to your problem; your full return address and
daytime phone number; a note describing the problem you experienced; 

a copy of your sales receipt

or other proof of purchase to determine warranty status.

C.O.D. shipments cannot be accepted. 

Return the appliance to:  ATTN: Repair Department, FARBERWARE®

708 South Missouri Street, Macon, MO  63552

Any questions or comments can be directed to Salton, Inc. at the above address or by calling or
E-Mailing the following:
TOLL FREE:  1-888-881-8101, Mon. - Fri., 7:30 a.m. - 6:00 p.m. CST
E-mail: [email protected]
Please refer to Model FSN100 when you call, write or E-Mail.

FARBERWARE

® 

is a registered trademark of Farberware Inc.

®

Manufactured and sold pursuant to a license from Farberware Inc.

®

04/01       P/N 60710

PRINTED IN CHINA

Summary of Contents for FSN100













Reviews: