Turntable Installation
Counter-top Installation
Hub (underside)
Glass tray
Turntable ring assembly
Turntable shaft
a. Nev
er place the glass tr
a
y upside do
wn.
T
he glass tr
a
y should never be restricted.
b. Both glass tray and turntable ring assembly
must alw
a
ys be used during cooking.
c.
All food and containers of food are alw
ays
placed on the glass tr
a
y for cooking.
d.
If glass tr
a
y or turntable ring assembly
crac
ks or breaks, contact your nearest
authorized service center
.
Remov
e all packing material and accessories.
Examine the o
v
en for any damage such as
dents or broken door. Do not install if o
v
en is
damaged.
Cabinet: Remove any protective fil found
on the micro
wav
e o
v
en cabinet surface. Do
not remo
v
e the light brown Mica co
v
er that
is attached to the o
v
en cavity to protect the
magnetron.
1.
Select a level surface that provide enough
open space for the intake and/or outlet v
ents.
A minimum clearance of 3.0 inches (7.5cm) is
required between the o
v
en and any adjacent
w
alls. One side must be open.
(1) Leav
e a minimum clearance of 12 inc
hes
(30cm) abo
v
e the o
ven.
2)
Do not remo
v
e the legs from the
bottom of the o
ven.
(3) Blocking the intake and/or outlet openings
can damage the o
ven.
(4)
Place the o
v
en as far a
wa
y from r
adios
and TV as possible. Operation of
microwav
e o
v
en may cause interference
to your radio or TV reception.
2.
Plug your o
v
en into a standard household
outlet. Be sure the voltage and the frequency
is the same as the voltage and the frequenc
y
on the rating label.
WARNING
– Do not install o
v
en o
ver
a range cook-top or other heat-producing
appliance. If installed near or o
v
er a heat
sour
ce, the o
v
en could be damaged and the
warr
anty would be v
oid.
3.0 inch(7.5cm)
3.0 inch(7.5cm)
12 inch(30cm)
OPEN
11