background image

ENGLISH

10

NOTE

: Some faucets may require you to also use the female hose thread adapter between 

the male adapter and your sink faucet as shown below. Make sure the rubber washer 

ring is inserted and connected to your sink or there is a risk for water leakage. 

WARNING

: If water leaks from faucet connection or washer connection, turn off 

water and tighten fully using a wrench. Be careful not to over tighten and damage 

water connection. Turn on water supply and make sure no leaks are present. 

DISCONNECTING THE WATER INLET HOSE

Dismantling the hose directly may cause water to splash due to the possible 

high water pressure in the hose, even after the faucet has been turned off. Please 

take off the hose as per following steps, even if the faucet is closed. 

• 

Turn off the faucet and then turn on the power and have let the 

machine run for about 5 seconds then turn it off. 

• 

Remove the connecting nuts from the faucet and washing machine.  

NOTE

: If the washing machine is frequently used, it is not necessary to 

dismantle the inlet hose to avoid possible damage to the screws. 

CONNECTING THE DRAIN HOSE

Included is one drain hose with clamp. Connect the bottom end 

of the drain hose (L Shaped) over the drain hose outlet, which is 

located at the back of the unit on the bottom as seen in picture. 

Make sure clamp is on tight, ensuring the hose cannot slip off. 

The other end should be placed in a dedicated drain outlet, basin or 

tub/sink. DO NOT LET DRAIN HOSE HANG ON THE GROUND. Water 

must be drained safely or there will be water damage. Make sure end 

of drain hose is in a secured position otherwise water pressure can 

force the hose to come loose, which can result in water damage. 

WARNING

: The highest point of the drain hose must be in 

the height of 2-4 feet above floor level, otherwise the washer 

cannot work normally. Make sure drain hose is in a secured 

position otherwise the water pressure can force the hose to 

come loose, resulting in water leakage. Washer should not be 

operated if leaks from washer connections are present.

Faucet Adapter

Quick Connect Adapter

Water Inlet Hose

Rubber Seal

Summary of Contents for FCW10BSCWHA

















Reviews: