![background image](http://html1.mh-extra.com/html/farberware/839724016642/839724016642_manual_544439009.webp)
9
OPERATION
•
Once the ingredients have reached the desired consistency, turn the control
knob (9) to ON position to stop operation (ill.
m
). The appliance switches to the
standby mode and indicators are flashing.
•
If you have finished using the appliance, turn the control knob (9) to OFF position
to switch the appliance off and then disconnect the plug (7) from the wall outlet
(ill.
n
).
•
Allow the appliance to cool down completely before cleaning it ( Cleaning and
Maintenance). Clean after every use.
Blending programs
The blending times in the chart below are not approximate and should be
adjusted to suit your own tastes, different food quantities and food manufacturer’s
instructions.
Button
Duration Speed (operation
cycle)
Action
Use
Control knob (9) max. 3
minutes
set speed (within
MIN - MAX range)
switching on/off;
set desired speed
blending raw
or cooked food
SMOOTHIE
button (10)
max. 2
minutes
soft start for 15s
followed with
acceleration to
reach max speed
press once to
start, press again
to stop
preparing
smoothies,
shakes
ICE CRUSH
button (11)
40
seconds
0.1s blade rotation
followed with 1s
resting time
press once to
start, press again
to stop
crushing ice
PULSE
button (12)
at will;
max. 3
minutes
max speed
press and hold;
release to stop
blending at
max speed
NOTE:
-
Press the PULSE (12) button at any time to bring the motor to max speed. If
used for 3 minutes, the appliance will switch off automatically. Wait 3 minutes
before using the appliance again.
-
Press and release the PULSE (12) button during the ICE CRUSH and
SMOOTHIE programs to stop the operation early. The appliance switches to
standby mode and indicators are flashing.
-
Pressing the ICE CRUSH and SMOOTHIE buttons will not affect control
knob (9) operation. Press and release the PULSE button (12) or turn the control
knob (9) to OFF position to finish the program during operation early.
-
Turning the control knob (9) during ICE CRUSH and SMOOTHIE programs will
modify the motor unit speed, following the control knob setting. Then turn the
control knob (9) to ON position to stop operation.
-
Turn the control knob (9) to OFF position to stop any program during
operation and switch the appliance off.
Blender_MJ-BL4501AW_IM_US_V4_161212.indd 9
12/12/16 1:57 PM
Summary of Contents for 839724016642
Page 15: ...7...