USE AND MAINTENANCE MANUAL - SECTION 4
STOCK PICKER ELEVAH 65-80 MOVE PICKING – Rev. 09_2019
Page 4-1
SEZIONE 4.
CONTROLS, LIGHTS AND MACHINE
OPERATION
INTRODUCTION
ATTENTION
THE MANUFACTURER DOES NOT HAVE ANY DIRECT CONTROL OVER
MACHINE APPLICATION AND OPERATION. THE USER AND THE OPERATOR
ARE REQUIRED TO OBSERVE THE CORRECT SAFETY PROCEDURES.
Stock Picker models ELEVAH 65-80 MOVE PICKING are electric machines
equipped with a cage assembled onto a lifting mechanism with aluminium
uprights.
The Stock Picker is
DESIGNED
TO CARRY, LIFT, STACK OR ARRANGE
LOADS ON SHELVING, CONTROLLED BY AN OPERATOR STATIONED
IN THE DRIVER'S SEAT, WHICH CAN BE RAISED AT THE SAME TIME
AS THE LOAD HANDLING DEVICE.
The main control station is located in the cage. The operator can drive the
machine and lift and lower the cage from the control console of the cage.
Vibrations generated by machines do not constitute any danger for the
operator who is inside the cage.
The level of continuous sound pressure (A measurement) in the cage is less
than 70 db (A).
