Faraone ELEVAH 65 MOVE, Use And Maintenance Instructions

Page: 39 / 66

USE AND MAINTENANCE MANUAL - SECTION 7
AERIAL PLATFORM ELEVAH 65-80 MOVE - Rev. 07_2019 Page 7-3
Check the wheels for wear
Check there is no debris on the wheels or around them. Check for wear or damage to the tread.
The wheels must be replaced if the edges are worn or the profiles are deformed. If the wheels
have significant damage on tread or sides, immediately assess the severity of the damage before
operating the machine again.
MAINTENANCE every 1000 h of work
Torque Reducer
Check tightening of the screws.
MAINTENANCE EVERY SIX MONTHS
Lubrication of moving parts and sliding wheels check
The extensions slide on runners fitted with nylon wheels. Four runners, two upper and two lower,
are fitted for each pair of extensions. 3 wheels are positioned on each runner, for a total of 12 for
each pair of extensions. On each runner, one of the 3 wheels turns on an adjustable axis. This
allows the wheels to be adjusted when they are worn thus giving rise to possible play of the
moving extendable structure parts.
Contact the Manufacturer for further information and instructions regarding the adjustment of the
sliding wheels of the extendable structure, when a backlash anomaly is found.
Transmission motor
Check the brushes for wear and replace them if required, and check the manifold.
Refer to the instructions in the appropriate paragraph for information on checking and replacing
the brushes;
MAINTENANCE EVERY TWO YEARS
Hydraulic Oil
Change the hydraulic oil in the tank.
Refer to the specifications described in the relative paragraph for information regarding hydraulic
oil change.
Torque Reducer
Inspect the reducer and change the oil.
Refer to the instructions in the relative paragraph for information on changing the oil of the
reducer;