USE AND MAINTENANCE MANUAL - SECTION 4
STOCK PICKER E5P100
– Rev. 02_2020
Page 4-8
PARKING THE MACHINE
1. Drive the machine to a well-protected and ventilated area.
2. Make sure the cage is completely lowered, press the emergency stop/switch-off button with
the removable key and take out the key.
NOTE:
if necessary, charge the batteries in preparation for the following work day.
ATTENTION
SWITCH THE MACHINE OFF AND ALWAYS REMOVE THE KEY WHEN THE STOCK PICKER
IS NOT IN USE TO PREVENT UNAUTHORISED USE.
TRANSPORT AND LIFTING PROCEDURES
General information
The stock picker can be transported to a work site using one of the following methods:
•
By driving the machine along the route on its base wheels, if the surface it travels on permits it;
•
By moving it with a forklift (
see the picture below – check the gross weight in the Operational
Technical Data Table of the machine
).
ATTENTION
LOAD THE MACHINE, ONLY IN A VERTICAL POSITION, ONTO A HEAVY DUTY VEHICLE
HAVING A USEFUL LOAD CAPACITY THAT WITHSTANDS THE TOTAL WEIGHT OF THE
MACHINE (CHECK THE GROSS WEIGHT IN THE OPERATIONAL TECHNICAL DATA TABLE
OF THE MACHINE)
ATTENTION
SECURE THE MACHINE SO THAT IT DOES NOT GET DAMAGED DURING TRANSPORT.