FAR RAC 211, Instructions For Use Manual

Page: 15 / 60

15
RAC 211
75036124 - RAC 211 – rev 00 - ( 04-2019 )
GB
EAC
RAC 211
RAC 211
270
46
B A
F C
H
G
D
E
Ø 109
Ø53
I
L
260
Ø20
EAC
RAC 211
TOOL IDENTIFICATION
The riveting tool RAC 211 is identified from a marking that
shows company name and address of manufacturer, designation
of the tool, CE. Always refer to the information on the riveting
tool when requesting technical service.
TECHNICAL DATA
• Working preessure ..................................................... 6 BAR
• Min. int. diam. of the compressed air
feeding hose ........................................
min. diam = 6 mm
• Air consumption per cycle .......................................... 3,4 Nl
• Maximum force.............................................. 6 BAR-6639 N
• Weight ................................................................... 1,400 Kg
• TWorking temperature .......................................... -5°/+50°C
• Root mean square in total acceleration frequency (Ac)
to which the arms are subjected. .........................
< 2,5 m/s
2
• A-weighted emission sound pressure level ............ 70 dBA
• Peak C-weighted instantaneous sound pressure . <130 dBC
• A-weighted sound power ......................................... 82 dBA
MAIN COMPONENTS
A)
................................................................................. Nozzle
B)
............................................................Balancer connection
C)
.................................................................... Nails container
D)
.......................................................Suction opening button
E)
....................................................... Tensile strenght button
F)
........................................................................Oil tank plug
G)
................................................ Compressed air connection
H)
.............................................................Head carring nozzle
I)
................................................................Protection bottom
L)
...............................................................................Selector
Company name and address
Designation of the tool
Serial number
AIR FEED
The air feed must be free from foreign bodies and humidity
in order to protect the tool from premature wear and tear of
the components in movement, therefore we suggest to use a
lubrificator group for compressed air.