GB
18
RAC 181-A
Date 03-2018
Revisione - 01
f1
f2
f3
f4
f5
RAC 181A
D
G
D
HOW TO USE YOUR RIVETING TOOL
Controlled suction (factory settings) (
pic.
f1-f2)
Make sure that the knob (
D
) is completely screwed (pic.
f3
).
Hold down the lever (
G
) as shown in the picture (pic.
f2
), turn
the knob (
D
) anticlockwise (pic.
f1
) to open and adjust the air
flow necessary to suck the spent mandrel.
Suction OFF (
pic.
f3-f4-f5)
Keep the lever (
G
) pressed as shown (pic.
f2
), turn the knob (
D
)
clockwise (pic.
f3
), until the suction stops. In this configuration,
the spent mandrel will come out by gravity, from the front or
back, tilting the riveting tool as shown in the picture (pic.
f4-f5
).
WARNING!
Before using the tool it is absolutely necessary to
fit the nails container (C), or the nails baffle (T).
