Code
L
Ø D
Ø A ÷
717004
12.5
3.4
2.9 ÷ 3.2
717005
14
4
3.4 ÷ 3.5
717007
15
4.5
3.8
717015
10
4.1
4 *
717016
9
3.1
3 *
717018
9
3.3
Magna-Lok®
Ø
4.8
(3/16”)
717019 10.5 4.5
Tamp-ace.
Ø
6
Tamp-Inox
Ø
6.4
Magna-Lok®
Ø
6.4 (1/4”)
GENERAL NOTES AND USE
The tool must be used for rivets diam. 4.8 (aluminium excluded) - 7.8 mm (aluminium only).
The riveting tool
RAC171
can also work with rivets type
FARBOLT
,
MONOBOLT®
and
MAGNA-LOK®
Ø 4.8 (3/16”) - Ø 6.4
(1/4”) by previous replacement of nozzles, cone and clamps.
The
RAC 171
oil pneumatic system assures more power than the pneumatic system used for other models. That
means a reduction in the problems due to the wear and tear of the components; therefore, there will be an increase
in reliability. The technical solutions adopted reduce the dimensions and the weight of the tool which, for these
reasons, make it very handy
.
The possibilities of leakage from the oil-dynamic system are eliminated by some sealed
gaskets, which solve this problem.
