Far Tools JDD 325A, Manual

Page: 27 / 83

© FAR GROUP EUROPE
Replacing consumables
Blade replacement
Belt replacement
01
02
FIG. G
Cleaning and maintenance
EN
Always use a suitable blade for the material that is not damaged.
01
Each time the blade is replaced, check the settings.
02
Functions of the machine
Start-up and shutdown
Cutting height setting
Table orientation
Guide operation (90°/45°)
Connection to an extractor
-
Belt tension
(113292)
Circular cutting
01
02
03
04
06
07
08
09
FIG. E
- Upper guiding block side block and backstop setting.
- Lower guiding block side block and backstop setting.
When idle, slacken the blade tension slightly to relieve the strain on the machine.
03
Do not use for cutting firewood
04
Check that the wood does not contain any metal parts (nails, screws, etc.) liable to damage
the blade.
05
FIG. F
Blade setting
01
- Blade positioning on wheels.
- Blade tension setting
Set the cutting to 90°
02
Wheel rubber binding replacement
03
How to change speed
(113292)
-
05 10
113292-Manual-F.indd 27 10/12/14 9:58:38