Fanvil i30, User Manual

Page: 39 / 54

[
键入文字
]
39
/ 54
Page priority determines the device how to deal with the new receiving multicast RTP streams
when it is in multicast session currently. When Page priority switch is enabled, the device would
automatically ignore the low priority multicast RTP streams but receive top-level priority multicast
RTP streams, and keep the current multicast session in maintained statu; If it is not enabled, the
device would automatically ignore all receiving multicast RTP streams.

Web Settings:
The multicast ss priority is higher than that of ee; ss has the highest priority.
Note: when you press the multicast key for multicast session, both multicast sender and receiver
would beep.
Listener configuration

Blue part (name)
"Group 1","Group 2" and "Group 3" are your setting monitoring multicast name.The group name
would be displayed on the screen when you answer the multicast. If you have not set, the screen would
display the IP: port directly.

Purple part (host: port)
It is a set of addresses and ports to listen, separated by a colon.