[
键入文字
]
11
/ 54
III.
Basic operation
1.
Answer a call
When a call comes in, the device would answer automatically. If you cancel auto answer feature and
set auto answer time, you would hear the ring at the set time and the device would auto answer
after configured timer.
2.
Call
Configure shortcut key as hot key and then set up a number; after that you might press the shortcut
key for making call to the configured extension(s).
3.
End call
Enable Release
(
You can enable release
)
key for hanging up feature to end call.
4.
Open the door
You might open doors through the following seven ways:
1)
Input password on the keyboard to open the door.
2)
Access to call the owner and the owner enter the remote password to open the door.
3)
Owner/other equipment call the access control and enter the access code to open the door. (access
code should be included in the list of access configuration, and enabled for remote calls to open the
door)
4)
Swipe the RFID cards to open the door.
5)
By means of indoor switch to open the door.
6)
Private access code to open the door.
Enable for local authentication, and set private access code. Input the access code directly under
standby mode to open the door. In this way, the door log would record corresponding card number
and user name.
7)
Active URL control command to open the door.
URL is “http://user:pwd@host/cgi-bin/ConfigManApp.com?key=F_LOCK&code=openCode”
a.
User and pwd is the user name and password of logging in web page.
b.
“openCode” is the remote control code to open the door.
Example: “http://admin:[email protected]/cgi-bin/ConfigManApp.com?key=*”
Summary of Contents for i30
Page 1: ... 键入文字 i30 IP Video Door Phone User Manual V3 0 ...
Page 16: ... 键入文字 16 54 e Auto Provision ...
Page 24: ... 键入文字 24 54 ...