Fanvil Technology Co., Ltd
HQ Add: Level 3, Block A, Gaoxinqi Building, Anhua Industrial Park, Qianjin 1 Road, 35th District, Bao'An, Shenzhen, 518101 P.R. China
Shenzhen Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Suzhou Tel: +86-512-6592-0605 SEA Tel: +60-3-512-21997
Email: [email protected] [email protected] Beijing Tel: +86-10-5753-6809
- 37
Field Name
Explanation
Feature Settings
DND (Do Not
Disturb)
DND might be disabled phone for all SIP lines, or line for SIP individually. But the
outgoing calls will not be affected
Ban Outgoing
If enabled, no outgoing calls can be made.
Enable Intercom
Mute
If enabled, mutes incoming calls during an intercom call.
Enable Intercom
Tone
If enabled, plays intercom ring tone to alert to an intercom call.
Enable Auto Answer
Enable Auto Answer function
Auto Answer
Timeout
Set Auto Answer Timeout
No Answer
Handdown
Enable automatically hang up when no answer
No Answer
Handdown Time
Configuration in a set time, automatically hang up when no answer
Dial Fixed Length to
Send
Enable or disable dial fixed length to send.
Send length
The number will be sent to the server after the specified numbers of digits are
dialed.
Enable Speed Dial
Handdown
Enable Speed Dial Hand Up function
Dial Number Voice
Play
Configuration Open / Close Dial Number Voice Play
Use Function Key to
Answer
Configure whether to enable the function keys, is disabled by default.
Status Led Reuse
Mode
Enable the function, the registered status indicator will reuse the call instructions
function, which means the LED will flashes in the call state.
Hot Key Dialed
Mode Selection
<Primary /Secondary>mode allow system to call primary extension first, if there
were no answer, it would cancel the call and then call secondary extension
automatically.
<Day/Night>mode allow system to check the calling time is belong to Day or Night
time, and then decide to call the number 1 or number 2 automatically.
Users just press speed dial key once.
Call Switched Time
The period between hot key dialing to the first and second number.
Day Start Time
The start time of the Day When you select<Day/Night>mode
